W&W Driving School in Melbourne West  Resources Page

 

Useful articles on getting a car drivers license in Victoria

How to Pass Driving Test in Victoria

If you have successfully logged your 120 hours of supervised driving, and passed your Hazard Test, you ready to schedule your Drive Test. The Drive Test’s purpose is to assess your driving habits behind a wheel. To successfully prepare for this test, be sure to not only study road rules, review your preparation checklist, and spend time behind the wheel with a trained instructor in Melbourne West driving school.


You are ready to sit for your Drive Test when you have completed all of the items on the checklist outlined below:


  • Successfully completed 120 hours of supervised driving, recorded in the official log book. Your driving hours should include a variety of different times of day and road conditions to demonstrate that your skill sets are broad. A Melbourne driving school can assist you in successfully logging these hours.
  • You feel comfortable and confident driving on a variety of roads (wet, curvy, rural and city), with varying speed zones and in varying traffic conditions (busiest times of day and during slow times).
  • When driving, you demonstrate awareness of other drivers, traffic conditions and road conditions without assistance. You are able to utilize your vehicle’s mirrors to observe your surroundings and utilize your signals whenever turning.
  • When on the road, you observe a safe distance between cars, and you don’t follow others too closely.
  • You observe all speed signs, driving safely at all times.
  • You can demonstrate turning right and left successfully at a variety of intersections.
  • You can demonstrate merging safely into traffic, such as into a busy highway.
  • You can demonstrate how to park the vehicle successfully, entering into a space in reverse, parallel parking and traditionally in a straight forward fashion.
  • You observe all stop signs, coming to a complete and full stop each time. Also, you observe all traffic signs while on the road.
  • You are able to operate your car and drive comfortably without the aid of a Melbourne West driving school instructor.

During your actual Drive Test, you will be assessed not only on your ability to complete the above tasks, but your ability to avoid serious mistakes while on the road. During your test, you should avoid colliding with any stationary or moving objects, coming near any other vehicles while on the road, causing an accident with other vehicles already on the road, failure to come to a complete stop, driving too slowly or quickly for posted speed signs or blocking pedestrian walkways.


When you can successfully navigate your vehicles in each of the above situations, avoiding the negative situations, you are ready to sit for your Drive Test. In addition to practicing on your own time with a supervised driver, be sure to spend time in Melbourne driving lessons to ensure that you perfect your technique.

IMPORTANT: All information provided on our site, including this article, is intended for your general knowledge and information only.  The details regarding this topic may have changed since the article was last published or updated. Keep in mind that government rules and legislation change from time to time. For the most up-to-date information visit www.vicroads.vic.gov.au

How to Apply for a Car Drivers License in Melbourne, Victoria

If you are currently preparing to apply for your driver’s license in Melbourne, it is essential that you spend time properly preparing so that your end result is positive; a license in hand. When preparing for your driver’s license tests, spend time with qualified professionals at a Melbourne driving school to increase your chances of positive results.


The 3 Steps


At the time of this writing there are 3 steps that must be completed to successfully obtain your driver’s license in Melbourne:


  1. Log 120 Hours- Inexperienced drivers must obtain at least 120 hours of live drive time with an experienced, supervising driver. This information must be properly logged in an official learner log book, which can obtained from a Melbourne driving school, at the local VicRoads centre or the official VicRoads website. The log must contain information about the number of supervised hours, the types of roads driven on, and the road conditions at the time of the supervised driving. Also, information about the supervising driver must be noted. You may consider logging hours through formal training through Melbourne driving lessons. These log books will be reviewed by VicRoads personnel, so their accuracy is of the utmost importance.
  2. Hazard Perception Test- Prior to your actual road driving test, you must complete the Hazard Perception Test. The purpose of this test is to review your skill sets around common road hazards, such as traffic issues, pedestrians and cyclists. You will watch several short videos and record your responses to a series of questions. It is advised that you spend time studying at a Melbourne driving school for the best chances of passing this test (score of 54% or greater).
  3. Drive Test- Once you have successfully passed the Hazard Perception Test, logged your 120 hours of supervised drive time and met the minimum requirements for holding a permit, you can schedule your Drive Test, that upon successful completion, grants you an official license. The goal of the test is to assess the readiness of the driver to head out onto the road on their own. It is recommended that all new drivers attend Melbourne driving lessons as well as study the manual, available both at Melbourne driving schools and via the VicRoads official website.

Upon successful completion of the three steps outlined above and upon reaching the required age and permit holding periods, you will be issued a Melbourne license. While the process may initially appear somewhat cumbersome, trained professionals at a Melbourne driving school will not only simplify the steps, but partner with you so that you are granted your own license in a timely fashion.

IMPORTANT: All information provided on our site, including this article, is intended for your general knowledge and information only.  The details regarding this topic may have changed since the article was last published or updated. Keep in mind that government rules and legislation change from time to time. For the most up-to-date information visit www.vicroads.vic.gov.au

What Happens During the Drive Test

When preparing to obtain your driver’s license, you will likely become a bit apprehensive about your Drive Test. Proper preparation both on the road, and off the road, will ensure that your test score is positive.


While much of your preparation can be done independently, it is recommended that you spend time with trained professionals of a Melbourne driving school so that you can perfect your technique.


Your Drive Test is comprised of two portions, both completed on the road. If you successfully pass the first portion, you will be permitted to sit for the second. If you unfortunately do not pass the first portion, you will not sit for the second.


Pre-Drive Assessment


Once you are in the vehicle with the assessor, you will be asked to demonstrate your knowledge of the following controls:


  • Indictor signals
  • Brake lights
  • Parking brake/handbrake
  • Wiper controls
  • Windshield wiper fluid/washers
  • Hazard lights
  • Headlights
  • Horn

In addition, you will be asked to start the engine.


Basic Driving Ability- First Session


The purpose of the first portion of the Drive Test is to demonstrate your ability to drive safely while on the roads. The entire test isn’t lengthy; approximately 10-15 minutes.


Some of the tasks that you may be required to demonstrate include: stopping and starting the vehicle, changing lanes, reverse and parallel parking, turning right and left at intersections and a three point turn. During your Melbourne driving lessons, you will learn how to successfully complete each of these tasks.


If you demonstrate any unsafe behaviours during the exam, your test will be immediately terminated. If however you drive safely, your test will be graded upon completion of your test. If you pass, you will progress to the second portion.


Driving on Busy Roads- Second Session


The second portion of your Drive Test will be completed on busier roads, or driving conditions. The purpose of this session is to examine your day-to-day driving skills, as this type of session is more realistic for what you will encounter regularly.


The test will take approximately 20 minutes to finish. Some of the skills that may be tested during these busier driving conditions may include changing lanes, merging into busier traffic and driving on both straight and curved roads.


Upon completion of your Drive Test, you will be given a pass or fail score. If you pass, you will be eligible for a driver’s license. If you fail, you will be provided with a variety of reasons. These reasons should be discussed with your Melbourne driving school instructor, as they are the areas that require improvement.


While the Drive Test may initially seem intimidating, through proper preparation in Melbourne driving lessons, study time and practice, you will be ready to take and pass your Drive Test.

IMPORTANT: All information provided on our site, including this article, is intended for your general knowledge and information only.  The details regarding this topic may have changed since the article was last published or updated. Keep in mind that government rules and legislation change from time to time. For the most up-to-date information visit www.vicroads.vic.gov.au

Getting your Ps - How to get a probationary car license

If you are 18 years of age, and a Victorian resident, you are likely excited and ready to obtain your probationary car license. This license will allow you to drive solo and will be sufficient until you obtain your permanent drivers license. Before you head out onto the road, be sure to obtain sufficient knowledge through attendance at a Melbourne driving school.

 

To obtain this probationary license, you must not only satisfy the minimum age requirement, but must pass a driving test and a hazard perception test at one of the VicRoads Customer Service Centres.

 

Learning Permit Holding Requirements

 

The requirements for holding a learners permit vary based upon when your learners permit was obtained and at the age in which the permit was issued.

 

If you are currently under the age of 21, you must hold your permit for at least 12 months before becoming eligible to apply for your license. In addition, you must have successfully completed at least 120 hours of driving with someone deemed as ‘experienced.’ These hours must be documented in a log book. Your Melbourne driving school instructor will be able to provide additional details.

 

If you are older than 21 years of age, you will not be required to keep a log book to obtain your license. However, if you are between the ages of 21 and 25 years, you will need to hold your permit for at least 6 months prior to applying for a license. If you are currently 25 years or older in age, you will be required to carry a valid permit for at least 3 months prior to applying for your license.

 

No matter your current age, obtaining current driving instruction via Melbourne driving lessons is essential for learning driving basics, and recommended prior to obtaining your license.

 

Scheduling your Appointment

 

On the day of your appointment, you will need to bring one primary form of identification, preferably your passport or birth certificate, a secondary form of identification, and proof of Victorian residence. One of these documents must contain a copy of your signature for identify verification. In addition to this documentation, you will need to bring accurate fees. Be sure to ask your Melbourne driving school for a list of current fees so you are prepared at your appointment.

 

In addition to the required documentation, you will be required to complete a Hazard Perception Test and a Drive Test. The Hazard Perception test requires drivers to recognize common road hazards, such as cyclists, pedestrians and traffic hazards. This test must be successfully completed before a driver is permitted to attempt their Drive Test. The Drive Test, which a Melbourne driving school can help you prepare for, tests your ability to drive on the road.

 

When preparing to apply for your driving permit or license, spend the time to be properly prepared by taking Melbourne driving lessons at a top rated Melbourne driving school.

IMPORTANT: All information provided on our site, including this article, is intended for your general knowledge and information only.  The details regarding this topic may have changed since the article was last published or updated. Keep in mind that government rules and legislation change from time to time. For the most up-to-date information visit www.vicroads.vic.gov.au

How Overseas Drivers can Get a Victorian Driving License

Visitors and immigrants into the Victoria area are often interested in the driving laws and whether they will be legally permitted to obtain a driving license. Visitors wonder if they will be able to use their overseas drivers licenses while in the country, if they will be required to obtain a new permit or license, and what is required if they decide to make Australia their permanent home.


For visitors, the short answer is the requirement to transfer their overseas driving license into a permanent one depends upon the duration of their stay in the country.


Overseas Drivers Licenses- Are they Valid?


Visitors to the area are permitted to utilize their foreign license for a period of six months following their entrance into Australia or six months from the time their visa was issued, if it was issued following entrance into the country.


While on the road, it is important to note that the license must either be translated into English, or accompanied by an international driving permit, or English translation to be considered valid by local authorities.


If the driver intends to remain in the area for a longer period of time than mentioned, they must change their overseas license into a local license valid in Victoria. Assistance through this transition is offered by local Melbourne driving schools.


Qualifications for a Victorian License


For anyone required to transfer their overseas driving license into a Victorian driver’s license, there are a few requirements that must be satisfied. To begin, evidence must be available demonstrating that the foreign license was valid over the past 3 years. If the overseas license is expired, the expiration date cannot be more than five years ago.


Probationary Drivers License and Learners Permit


To obtain a probationary driver’s license, the applicant must be at least 18 years of age, and have a driving record with an overseas license for a period of no less than three years. If the applicant’s license hasn’t been valid for three years, a probationary period may be applied to their driving privileges.


For younger drivers (age 16 years and up), a learners permit may be available. Drivers with a learners permit are urged to attend Melbourne driving lessons prior to embarking on the road.


Victorian Drivers License Applications


For anyone interested in obtaining a Victorian drivers license, an appointment will need to be made for a vision test, road knowledge test and a driving test. There are few exceptions to these requirements, so it is important to speak with your Melbourne driving school instructor for details prior to scheduling an appointment.


When a driver attends the appointment, they will need to bring their overseas license along with an approved English translation if necessary, a primary form of identification (passport or birth certificate), a secondary form of identification (preferably a picture ID with proof of address), and evidence of a local Victorian address.


The process of obtaining a Victorian drivers license is fairly straight forward. Once you have completed your Melbourne driving lessons, be sure to speak with an instructor at your Melbourne driving school for additional details that will help facilitate the process.

IMPORTANT: All information provided on our site, including this article, is intended for your general knowledge and information only.  The details regarding this topic may have changed since the article was last published or updated. Keep in mind that government rules and legislation change from time to time. For the most up-to-date information visit www.vicroads.vic.gov.au

 

W&W Driving School in Melbourne West | Useful Links

Australian Driver Trainers Association (ADTA) – representative body of professional driving instructors of which W&W Driving School in Melbourne West is a proud member!

W&W Driving Schooldriving school in Melbourne West, driving lessons, driving instructor

VicRoads Official Website – find out information on licenses, registration and more!

VicRoads latest travel & road conditions – the latest Melbourne traffic information & reports, with regular updates.

Real-time traffic updates – real-time traffic information covering all the major roads, freeways and tollways in Melbourne.

VicRoads Licenses – what you must know about to be able to pass the driving test in Victoria.

Department of Transport (Victoria) - information about current and future public transport, road and sustainable projects across the state and more.

CityLink – CityLink is a 22-kilometre automated tollway that connects the Tullamarine Freeway, the West Gate Freeway and the Monash Freeway. CityLink roads are clearly marked with blue and yellow tollway signs.

CityLink toll calculator – find out how much traveling on the CityLink will cost you.

EastLink – EastLink is Melbourne’s second fully-electronic tollway, comprising about 39km of freeway-standard road connecting the city’s eastern and south-eastern suburbs.

Eastlink toll calculator - find out how much traveling on the Eastlink will cost you.

GreenFleet driving tips – find out how to reduce greenhouse gas emissions and fuel costs – regardless of the car you drive.

For your convenience W&W Driving School in Melbourne West covers the following VicRoads offices which conduct registration and licensing transactions:

W&W Driving School in Melbourne West has helped HUNDREDS of people just like you PASS their driving test the FIRST TIME – it may do the same for YOU!